Orbital speed of Earth

More
19 years 11 months ago #11868 by Jim
Replied by Jim on topic Reply from
I need to edit my last post to read the Earth is nearer the sun at full moon-not the moon is nearer.

Please Log in or Create an account to join the conversation.

More
19 years 11 months ago #11869 by Jim
Replied by Jim on topic Reply from
Are the magnetudes of the tidal bulges caused by the moon and sun proportional to the distance from Earth to them? As you explained in another post the diameter of Earth is the same in either calculation so is the moon making a bigger tidal bulge-how do you calculate that proportion? The diameter of Earth is 1.3x10E7 meters and the sun is 1.5x10E11m from Earth. How does that make a bulge almost as big as 1.3X10E7m and 4x10E8m? You did say the diameter of Earth was a factor in this-right?

Please Log in or Create an account to join the conversation.

More
19 years 11 months ago #11870 by tvanflandern
<blockquote id="quote"><font size="2" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by Jim</i>
<br />Are the magnetudes of the tidal bulges caused by the moon and sun proportional to the distance from Earth to them?<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">They are inversely proportional to the cube of distance.

<blockquote id="quote"><font size="2" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote">As you explained in another post the diameter of Earth is the same in either calculation so is the moon making a bigger tidal bulge-how do you calculate that proportion?<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">The gravitational force on Earth with mass m caused by another mass M at a distance R is GmM/R^2. If Earth's radius is r, then the gravitational force on the front side of Earth is GmM/[R-r]^2, and on the back side of Earth is GmM/[R+r]^2. So the excess force on the front side over the back side is (using some algebra and some reasonable approximations such as R &gt;&gt; r): 4GmMr/R^3.

So that is the size of the small force leading to a tidal bulge. Note that the albebra shows why it must be inversely proportional to R^3. When we calculate this force acting in one direction over several hours (because the solid Earth spins), and allow for Earth's resistance to deformation, we arrive at the result that the tidal bulge from the Moon is typically three feet (relative to the Earth's center); whereas that from the Sun (farther away but much more massive) is 2.2 times smaller, or a bit over one foot.

<blockquote id="quote"><font size="2" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote">The diameter of Earth is 1.3x10E7 meters and the sun is 1.5x10E11m from Earth. How does that make a bulge almost as big as 1.3X10E7m and 4x10E8m?<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">You lost me there. Solid-body tidal bulges are tiny -- a meter or less. -|Tom|-

Please Log in or Create an account to join the conversation.

More
19 years 11 months ago #10998 by Jim
Replied by Jim on topic Reply from
I see you are using a lot of math to get from point A to point B that is not transparent. The meters in r and the meters in R are not at all as interchangable as the math allows don't you think?

Please Log in or Create an account to join the conversation.

More
19 years 11 months ago #11000 by tvanflandern
<blockquote id="quote"><font size="2" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by Jim</i>
<br />I see you are using a lot of math to get from point A to point B that is not transparent. The meters in r and the meters in R are not at all as interchangable as the math allows don't you think?<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">You can't ask "How do you calculate that proportion" if you haven't yet mastered even algebra, which is the math of symbols and equations.

If you just need the intermediate steps spelled out for you, that is one thing. If you understand F = ma (Newton's second law) but not F = GmM/R^2 (Newton's universal law of gravitation), then I would be at a loss for how to answer your "how do you calculate" question.

Would someone else like to have a go at it? (Show the steps in the formula manipulation and/or explain Newton's universal law and/or explain something else, as Jim wishes.) -|Tom|-

Please Log in or Create an account to join the conversation.

More
19 years 11 months ago #12078 by Jim
Replied by Jim on topic Reply from
Well, as it usually is the way things go this is getting way off the point. Can we restart from a few laps back? Or lets get bogged down in calling me stupid and lacking in book learning.

Please Log in or Create an account to join the conversation.

Time to create page: 0.277 seconds
Powered by Kunena Forum